Connect the WiFi adapter to The WiFi adapter power settings slider sets a balance between the computer’s power source and the battery. From your desktop, right-click My Computer and click Properties. This setting takes effect when either Network Infrastructure or Device to Device ad hoc mode is used. Help us by reporting it.

Uploader: Melrajas
Date Added: 9 January 2011
File Size: 23.17 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 43689
Price: Free* [*Free Regsitration Required]

Cancel Closes and cancels any changes. Click the Hardware tab.

To achieve transfer rates greater than 54 Mbps on The default inteo is for this to be turned off disabled. Log on as a local user or a domain user using cached credentials.

Downloads for IntelĀ® PRO/Wireless ABG Network Connection

Default Power settings are based on the computer’s power source. Lets you select a balance between power consumption and WiFi adapter performance. Select the Advanced tab. Only significant link quality degradation causes it to roam to another access point. QoS provides prioritization of traffic from the access point over a wireless LAN based on traffic classification.

Ad Hoc Channel Unless the other computers in the ad hoc network use a different channel from the default channel, there is no need to change the channel.


Select when connecting to ad hoc networks that contain stations that do not support ad hoc wlxn management Maximum Power Savings: Help us by reporting it. These wireless modes Modulation type determine the discovered access points displayed in the WiFi Networks list.

Then select a new value or setting.

Intel PRO/Wireless 3945 and WiFi Link 4965 devices

Adjust the slider for the desired setting. This setting takes effect when either Network Infrastructure or Device to Device ad hoc mode is used. The Use default value box is not present for all properties, for example, Ad Hoc Channel. This allows the maximum number of wireless devices to operate in dense areas and reduce interference with other devices that it shares the same radio spectrum with.

For profiles where “Use Windows logon credentials” has been selected, if the user then attempts to connect using that profile, the user is still prompted for user credentials for authentication. To modify a profile and enable Maintain connection on log off: If supported, short preamble should be used.

If not, use Long Tx Preamble. Auto is the default setting.

iwlwifi – Debian Wiki

An administrator can enable or disable support for high throughput mode to reduce power-consumption or conflicts with other bands or compatibility issues. It may be wlqn of the following network connection WiFi adapters:.


Your wireless client will not roam. The optimal setting is for a user to always set the transmit power at the lowest possible level that is still compatible with the quality of their communication. Your wireless client continuously tracks the link quality.

Get tech support here.

Connect the WiFi adapter to This setting is available only if the WiFi adapter is one of the following: In a WiFi network environment where several access points are nearby, this feature will reduce interference and improve your wireless connection.

You should only use no security when setting up or troubleshooting the network.

Roaming Aggressiveness This setting lets you define how aggressively your wireless client roams to improve connection to an access point.

Subscribe US Now